Measuring for Blinds

INSIDE MOUNT: Mark order "Inside Mount"; measure width of opening at top, middle and bottom of window opening. Use the smallest measurement when ordering. Factory will make a slight deduction to insure proper fit. An additional deduction of 1/8" will be made if blind is being ordered with side mount bracket option. Measure height of openingon left, center and right, use smallest measurment when ordering.

OUTSIDE MOUNT: Mark order "Outside Mount"; measure width and height of area to be covered and provide exact dimensions required. (It is recommended that blinds overlap the window by at least 1½" on each side). If mounting brackets beyond the casing or to clear obstructions (i.e., window cranks, trim work, etc.), specify projection brackets (1¾", 2¾", 4¾", or 3/8" projection block) required.

NOTE: Inside Mount measurement represent the exact window opening size, the factory will make necessary deductions to insure a proper fit. Outside Measurements represent the exact blind size needed. No allowances will be made by factory. Please use a steel tape measure to insure proper measurements.

Bay Windows/Corner Windows/Specialty Windows: Contact Alpha-Aero Draperies for assistance.

Measuring for Window Draperies & Treatments

An essential element in manufacturing perfect custom draperies is accurate measurments. Whatever the style window covering you have selected, you'll need to collect three basic measurements:

1. Rod Width
2. Drapery Finished Length
3. Drapery Finished Width

ROD WIDTH: is determined by adding glass width and stack back. Draperies and shirred curtains are usually made wide enough to expose the glass when they are open.